Vgo Tel i888 flash file By Cm2 Read

Vgo Tel i888 Mt6261 Flash File Cm2 Mtk 1.58 Setup Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...

Phone found! [ 45 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : F1D51B76C0236CAFE8A1EFE101687A19

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64

[0] : FLASH_DIE : 00C8 0060 0017 0000 

[0] : FLASH_LEN : 0x00800000

SDS_INFO : 0x007FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 8388608 bytes read

Check and collect compile info

File_Info   : FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin

FileVersion : MAUI.11C.W13.52.MP.V2.F8

Saved to : c:\infinitybox\cm2mtk\Read_out\FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin

Done!

Elapsed: 00:00:38

Reconnect Power/Cable!

Vgo Tel i888 flash file this is 100 percent tested and from almasoommobile                                              

 click here to download

 

qmobile dhoom trio flash file

qmobile dhoom trio Sc6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder (2)\Dhoom Trio sc6531E FLASH_DUMP.bin

Done!

Elapsed: 00:01:35

Reconnect Power/Cable!

QMobbile  dhoom trio flash file this is 100 percent tested and from almasoommobile                   

click here to download

 

vgo tel i710 flash file By Cm2 Read File

vgo tel i710 MT6261Flash File Cm2 Mtk 1.58 Setup Read 

 Al Masoom Mobile

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...

Phone found! [ 20 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 5576FDB3881F847DE3624D2581715567

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

FileVersion : MAUI.11C.W13.52.MP.V2.F9

Saved to : C:\InfinityBox\CM2MTK\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

Done!

Elapsed: 00:00:31

Reconnect Power/Cable!

vgo tel i710 flash file  this is 100 percent tested and from almasoommobile                                       

                                       

click here to download
 

 

Tinstar S400 Sc6531E flash file

Tinstar S400 Sc6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder (2)\Tinstar S400 Sc65531E FLASH_DUMP.bin

Done!

Elapsed: 00:01:50

Reconnect Power/Cable!

     Tinstar S400 Sc6531E  

this is 100 percent tested and from almasoommobile   

                                               

click here to download

 

E-Tachi E5310 Sc6531E flash file

E-Tachi E5310 Sc6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]
1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ... 
Device Connected!BootVersion : SPRD3BootSource  :  InternalLibraryBootVersion : Infinity SCR SC6531E Loader v 1.2Port speed : 921600FDL Flash  : Control transfered!
Boot Done!
CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]
Read Ok!
Saved to : C:\Users\Al Masoom-pc\Desktop\New folder (2)\E-Tachi E 5310 Sc6531E FLASH_DUMP.bin
Done!Elapsed: 00:02:06
Reconnect Power/Cable!

 E-Tachi E 5310 sc6531E 

this is 100 percent tested and from almasoommobile

click here to download

 

vgo tel i252 flash file

vgo tel i252 MT6261Flash File Cm2 Mtk 1.58 Setup Read 

 Al Masoom Mobile

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...

Phone found! [ 7 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 4418DDBA4EB1321FC0DA29D6E92C00E3

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

FileVersion : MAUI.11C.W13.52.MP.V2.F9

Saved to : c:\infinitybox\cm2mtk\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

Done!

Elapsed: 00:00:15

Reconnect Power/Cable!

vgo tel i252 Mt6261 this is 100 percent tested and from almasoommobile

click here to download

 

Sol M1900 SCR Sc6531E Flash File

Sol M1900 SCR Sc6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.02

SCRD mode : AUTO

SPRD mode : SC6530 : REV : 0000 : NOR

SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Disktop\Sol M1900\Sol M1900Sc6531FLASH_DUMP.bin

Done!

Elapsed: 00:00:44

Reconnect Power/Cable!

Sol M1900  this is 100 percent tested and from almasoommobile

click here to download

 

 

Q Mobile F6 V2 Mt6261 Flash file

Q Mobile F6 V2 MT6261Flash File Cm2 Mtk 1.58 Setup Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...

Phone found! [ 44 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : 5EE011BFC8B8318004ABD8C23ACD460A

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

  Q Mobile F6 V2  this is 100 percent tested and from almasoommobile

click here to download  
 

 

Calme Mobile c15 SCR SC6531E flash file

Calme Mobile c15 SCR SC6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder\Clame C15 Sc6531E FLASH_DUMP.bin

Done!

Elapsed: 00:01:20

Reconnect Power/Cable!

Calme c15 Sc 6531E this is 100 percent tested and from almasoommobile

click here to download  
 

 

Calme C12 SCR SC6531E flash file

 

Calme C12 SCR SC6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\clame FLASH_DUMP.bin

Done!

Elapsed: 00:00:58

Reconnect Power/Cable!

                    Calme C12 SCR SC6531E  this is 100 percent tested and from almasoommobile

click here to download  

 

Q Mobile E4x Flash file

Q Mobile E4x  Sc6530 Flash File Cm2 Scr Read 

 Al Masoom Mobile

SCRD mode : AUTO

SPRD mode : SC6530 : REV : 0000 : NOR

SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\Q E4X Sc6531E FLASH_DUMP.bin

Done!

Elapsed: 00:01:26

Reconnect Power/Cable!

      Q Mobile E4x Flash file this is 100 percent tested and from almasoommobile

click here to download  

 

gfive Rock flash file download Read by Cm2 Scr

gfive Rock Sc6531E Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\gFive Rock sc6531E FLASH_DUMP.bin

Done!

Elapsed: 00:02:00

Reconnect Power/Cable!

Gfive Rock sc6531E Flash File this is 100 percent tested and from almasoommobile 

       

click here to download                                                                                                                                               

 

 

calme c116 flash file Read by Cm2 Scr setup

calme c116 Sc6531E  Flash File Cm2 Scr Read 

 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR SC6531E Loader v 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-Pc\Documents\calme c116 sc6531E FLASH_DUMP.bin

Done!

Elapsed: 00:01:14

Reconnect Power/Cable!

Calme C116 sc6531E Flash File this is 100 percent tested and from almasoommobile 

click here to download                                                                                                                                               

 

 

UFS Panel 2.3.0.9 upgraded 2020 100% working by Almasoom mobiles

 UFS Panel 2.3.0.9 upgraded 2020 100% working by Almasoom mobiles 

this is 100 percent tested and from almasoommobile 

click here to download