All Mobile Flash files & Register software available Here ..........!☻

  • This is default featured slide 1 title

    Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.

  • This is default featured slide 2 title

    Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.

  • This is default featured slide 3 title

    Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.

  • This is default featured slide 4 title

    Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.

  • This is default featured slide 5 title

    Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.

Vgo Tel i888 flash file By Cm2 Read



Vgo Tel i888 Mt6261 Flash File Cm2 Mtk 1.58 Setup Read 
 Al Masoom Mobile

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 45 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : F1D51B76C0236CAFE8A1EFE101687A19
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00ED , [GigaDevice] GD25LQ64
[0] : FLASH_DIE : 00C8 0060 0017 0000 
[0] : FLASH_LEN : 0x00800000
SDS_INFO : 0x007FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 8388608 bytes read
Check and collect compile info
File_Info   : FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F8
Saved to : c:\infinitybox\cm2mtk\Read_out\FISE61A_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F8.bin

Done!
Elapsed: 00:00:38
Reconnect Power/Cable!


Vgo Tel i888 flash file this is 100 percent tested and from almasoommobile                                              


 click here to download

 
Share:

qmobile dhoom trio flash file







qmobile dhoom trio Sc6531E Flash File Cm2 Scr Read 
 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder (2)\Dhoom Trio sc6531E FLASH_DUMP.bin

Done!
Elapsed: 00:01:35

Reconnect Power/Cable!


QMobbile  dhoom trio flash file this is 100 percent tested and from almasoommobile                   

click here to download

 
Share:

vgo tel i710 flash file By Cm2 Read File



vgo tel i710 MT6261Flash File Cm2 Mtk 1.58 Setup Read 
 Al Masoom Mobile

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 20 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 5576FDB3881F847DE3624D2581715567
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F9
Saved to : C:\InfinityBox\CM2MTK\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

Done!
Elapsed: 00:00:31
Reconnect Power/Cable!


vgo tel i710 flash file  this is 100 percent tested and from almasoommobile                                       
                                       

click here to download
 

 
Share:

Tinstar S400 Sc6531E flash file





Tinstar S400 Sc6531E Flash File Cm2 Scr Read 
 Al Masoom Mobile

Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder (2)\Tinstar S400 Sc65531E FLASH_DUMP.bin

Done!
Elapsed: 00:01:50

Reconnect Power/Cable!


     Tinstar S400 Sc6531E                                                 

click here to download

 

Share:

vgo tel i252 flash file




vgo tel i252 MT6261Flash File Cm2 Mtk 1.58 Setup Read 
 Al Masoom Mobile

Chinese Miracle II  [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 7 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 4418DDBA4EB1321FC0DA29D6E92C00E3
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin
FileVersion : MAUI.11C.W13.52.MP.V2.F9
Saved to : c:\infinitybox\cm2mtk\Read_out\FISE61D_11C_PCB01_gprs_MT6261_S00.MAUI_11C_W13_52_MP_V2_F9.bin

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

vgo tel i252 Mt6261 this is 100 percent tested and from almasoommobile

click here to download

 
Share:

Sol M1900 SCR Sc6531E Flash File





Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.02

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Disktop\Sol M1900\Sol M1900Sc6531FLASH_DUMP.bin

Done!
Elapsed: 00:00:44

Reconnect Power/Cable!

Sol M1900  this is 100 percent tested and from almasoommobile
click here to download


 

 
Share:

Q Mobile F6 V2 Mt6261 Flash file




Q Mobile F6 V2 MT6261Flash File Cm2 Mtk 1.58 Setup Read 
 Al Masoom Mobile


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 44 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 5EE011BFC8B8318004ABD8C23ACD460A
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000 
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now ... 

  Q Mobile F6 V2  this is 100 percent tested and from almasoommobile

click here to download  
 

 
Share:

Calme Mobile c15 SCR SC6531E flash file











SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\New folder\Clame C15 Sc6531E FLASH_DUMP.bin

Done!
Elapsed: 00:01:20

Reconnect Power/Cable!


Calme c15 Sc 6531E this is 100 percent tested and from almasoommobile

click here to download  
 

 
Share:

Calme C12 SCR SC6531E flash file

 




Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\clame FLASH_DUMP.bin

Done!
Elapsed: 00:00:58

Reconnect Power/Cable!

                    Calme C12 SCR SC6531E  this is 100 percent tested and from almasoommobile

click here to download  



 
Share:

Q Mobile E4x Flash file






SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


SPRD mode : SC6531 : REV : E000 : NOR

Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\Q E4X Sc6531E FLASH_DUMP.bin

Done!
Elapsed: 00:01:26

Reconnect Power/Cable!


      Q Mobile E4x Flash file this is 100 percent tested and from almasoommobile

click here to download  

 
Share:

gfive Rock flash file download Read by Cm2 Scr





Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-pc\Desktop\gFive Rock sc6531E FLASH_DUMP.bin

Done!
Elapsed: 00:02:00

Reconnect Power/Cable!

Gfive Rock sc6531E Flash File this is 100 percent tested and from almasoommobile 

       
click here to download                                                                                                                                               


 

 
Share:

calme c116 flash file Read by Cm2 Scr setup







Operation : Read Flash [ v1.02 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ... 

Device Connected!
BootVersion : SPRD3
BootSource  :  InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok!

Saved to : C:\Users\Al Masoom-Pc\Documents\calme c116 sc6531E FLASH_DUMP.bin

Done!
Elapsed: 00:01:14

Reconnect Power/Cable!
Calme C116 sc6531E Flash File this is 100 percent tested and from almasoommobile 


click here to download                                                                                                                                               



 

 
Share:

UFS Panel 2.3.0.9 upgraded 2020 100% working by Almasoom mobiles







 UFS Panel 2.3.0.9 upgraded 2020 100% working by Almasoom mobiles 

this is 100 percent tested and from almasoommobile 

click here to download                                                                                                                                        

 

 
Share:

Main Tags

Recent Posts