GFive Mini Rebon (FF257-MB-V0.2E) SC6531E Infinity CM2SCR Flash File
GFive Mini Rebon (FF257-MB-V0.2E) Sc6531E Flash File Cm2 Scr Read
By
Al Masoom Mobile
Mobie Information
Name Decvie= Gfive
Model = FF257-MB-V0.2E
CPU Type = Sc6531E
Fist step For Flashing Requirements 1:-Download and install SPD USB Mobile driver
2:-Download and install Mobile supported box / Dongle setup like Infinity Cm2
How to Flash
1-Download and install SPD USB Mobile drivers
2-Download the Flash File From the Link and extract it
3-Open supported box setup / Dongle.
4-Select Correct Mobile CPU type From Setup and Choose flash file.
Turn off the Mobile, remove the battery.
5-Connect the Cellphone with a USB data cable through Computer and
insert the Mobile battery again.
Press and hold Mobile Boot Key
6-Click on flash & then wait for the complete flash
7-Complete Flash remove the USB data cable and power on the device.
Enjoy it has done.
Aftr flash Note :
Please make a backup of your device before installing or updating Flashing File
Boot Key:-
GFive Mini Rebon (FF257-MB-V0.2E) SC6531E boot key is *# + Home
QMobile Khiladi V2 MT6261 Infinity Cm2 Dongle Tested Bin Flash File & Nv File Free Download
Mobile About
Device Name: QMobile
Mobile Model number: Khiladi V2
CPU type: MT6261
Language:Multi
Credit:Free
Device Name: QMobile
Mobile Model number: Khiladi V2
CPU type: MT6261
Language:Multi
Credit:Free
Requirements Mobile Flashing File
1-Download and install MTK USB Mobile driver
2- Download and install any Mobile supported box / Dongle setup like Infinity Cm2, Miracle Box
How to Mobile Flash
- Download and install MTK USB Mobile drivers
- Download the Flash File From the Link and extract it
- Open Miracle Box or any supported box setup / Dongle.
- Select Correct Mobile CPU type From Setup and Choose flash file.
- Turn off the Mobile, remove the battery.
- Connect the Cellphone with a USB data cable through Computer and insert the Mobile battery again.
- Click on flash & then wait for the complete flash
- Complete Flash remove the USB data cable and power on the device.
- Enjoy it has done.
Note Please: Make a backup of your flash file before installing new this Flashing File
QMobile Khiladi V2 MT6261 Infinity Cm2 Read 100% Tested By Al Masoom Mobile
click here to downlload
QMobile i8i SP7731 Android 7.0 Infinity Cm2 Read 100% Tested Flash File
Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable
==== Wait for phone...
Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
- > Wait phone connected ...
Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
- > Wait phone connected ...
Phone found! [ 19 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : i8i
Model Brand : Qmobile
Model Device: i8i
AndrVersion : 7.0
BaseBand CPU: SP7731CEA
Project Ver : QMobile_i8i_MP_28_06
Model Ext : QMobile i8i
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_trunk_W18.03.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2693 MiB
Saved to : C:\Users\Al Msoom-PC\Videos\SP7731CEA_i8i_7.0_QMobile_i8i_MP_28_06_QMobile_i8i\
Done!
Elapsed: 00:12:00
Reconnect Power/Cable!
QMobile i8i SP7731 Flash File Android 7.0 Infinity Cm2 Read 100% Tested By Al Masoom Mobile
click here to downlload
MZ M787 Mt6261 Flash File
Chinese Miracle II [MTK module] v 1.58Operation : Read Flash [ v1.58 ]1. Power Off Phone , Remove battery , Insert back2. Insert USB cable. In some cases require hold BootKey ( '*' )Wait for phone...Phone found! [ 14 ]Sync...Sync Ok, read regs...Inital regs read doneBoot Info :BB_CPU_ID : 6261BB_CPU_HW : CB01BB_CPU_SW : 0001BB_CPU_SB : 8000BB_CPU_NM : [MediaTek] MT6261_S0000BB_CPU_SN : DDC6751362BD5E4AD762BE3FD9FA99CFBROM Protocol Version : 05Setting...Setting done , result code 0x000EBROM stage doneSeek and prepare DownloadAgentDownloadAgent matching HW Found!DA verify and select doneSending DA to target ...DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8ESOC_VERIFY : 0xC1BOOT_STYLE : SF_FLASH_BOOTNOR Flash IC initialized[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV[0] : FLASH_DIE : 00EF 0070 0016 0000[0] : FLASH_LEN : 0x00400000SDS_INFO : 0x003FE000 , 0x00002000INT_RAM : 0x0000D000EXT_RAM : 0x00400000Reading Flash Content now ...Read Flash nowRead Ok , 4194304 bytes readCheck and collect compile infoFile_Info : L2016_JHD_T14_MZ_M787_PCB01_gprs_MT6261_S00.L2016_JHD_T14_M787_MZ.binFileVersion : L2016_JHD_T14_M787_MZSaved to : C:\InfinityBox\CM2MTK\Read_out\L2016_JHD_T14_MZ_M787_PCB01_gprs_MT6261_S00.L2016_JHD_T14_M787_MZ.binDone!Elapsed: 00:00:25Reconnect Power/Cable!MZ M787 Mt6261 Flash File file
this is 100 percent tested By Al Masoom Mobile